Our expansion joints are designed and manufactured to suit
our customers individual requirements and applications. Technical
assistance is always available to help establish the best solution
to expansion joint problems. We can supply full metal packages,
including support steel work and flanges, backing flats and
flow plates, designed for economy and efficiency.
The
design of the supporting metalwork and flange configuration
is important and the choice is influenced by the prevailing
conditions: positive or negative pressure; large or small amounts
of movement, axially and/or laterally; velocity.
Profiles
Suitable only for applications operating under negative
pressure. But will accommodate relatively large
movements.
Suitable
only for applications operating under positive pressure.
But will accommodate relatively large movements.
Used
when flange depth is limited and is suitable only
for applications operating under positive pressure.
Suitable
for both positive and negative pressures. Being
preferred design this profile is the easiest
to install and if used with a suitable insulation
bolster (fitting inside the cavity) will provide
excellent resistance to the highest temperatures.
Suitable
for operating under both positive and negative pressures.
Mostly for applications with small flanges and little
movement.
Besides
our standard range of profiles KMK Compensators
have the capability to produce custom built
designs if required.
